PDA

View Full Version : zip char-g bit zap bullet


hbarer
10-06-2002, 12:30 AM
dunno why
but my zip is my best car by far
(i have 2 bits, 3 zz's, 3 bullets, and an iracer)
since i put the circuit board from a bullet in it
its fast and handles great
with just a little drift in the turns
makes the coolest scaping noise
on the turns of my plywood track
i encourage anyone to try it
and don't be afraid of those
steering wires i bought a third hand tool
for 10 bucks... its a stand with 2 alligator clips
and a magnifier holds your work for you
and don't try it unless you haven't had and
caffeine for the day
if you look at the boards of any of these cars
under a magnifier you'll see the connections
are marked and they're the same on all of em
power (+) ground (-) r, l , f, r
power from the battery also connects to each side
of the steering coils (3 wires on one contact)
l is left, r is right, and f and r are forward and reverse
to the motor

good luck

oinkoink

hbarer
10-06-2002, 12:32 AM
oh yeah ands it 40 mhz
so i get another frequency

Baller Status
10-06-2002, 12:53 AM
Where can I get a Bullet circuit board alone?!

Does it fit directly to the ZZ?

Seems like the most efficient way to get this thing running with the DigiQs.

Unless they make a single 2.4 volt battery...do they exist? Did your mod increase your range? How do I increase my range to 100ft?!

Thanks.. sorry for all the ?'s