my lowered se

[BabyKiller]

:D

[Bad Company]

Nice work babykiller! Now take those lights out and slaaaammmm that thang!

[BabyKiller]

its about as low as it goes without a body kit like you did with yours

[Bad Company]

Originally posted by BabyKiller
its about as low as it goes without a body kit like you did with yours

Did you remove the LED PCB under the roof and the tabs that hold it? If not, it WILL go lower. I removed all that and got another 1/16" lower even without the body skirts.

When you have it as low as it goes, you will not have any space between the front tire and the fender. Take another look at mine again.

[BabyKiller]

yes have it out and believe it or not i did that lowering with no modding :p :p :D :D :cool: :cool: for the front take the springs out and the back just push the tab up higher in the body than the hole but if you try this its not my falt if you break you tabs :P

[Bad Company]

This is as low as it goes, and you have to remove the LED PCB and tabs. You will notice that even with the skirts, the main body is a lot lower than the original. Notice the wheels tucked up under the fenders.

[BabyKiller]

so i achived mine with no modding i feel soo speacial:o :o :D :rolleyes:

[Bad Company]

And as I said, Nice Work! I was only stating that it can go lower without the appearance of the skirts as you said was the reason mine looked so low.

[BabyKiller]

:D time o break out the dremel

[BabyKiller]

btw did you make those skirtsif not whered you get them?

[Bad Company]

I made them out of stacked styrene sheets. You can get it at the local hobby shop. You can see more about it in the other thread.